1. Introduction
KP-P3001-C Three phase phantom load power source is a new generation, high stability,single phase energy meter calibration phantom load power source(three phase . It uses the advanced technology and electronic components available in 90 decade . The instrument can generate sine-wave voltage/current and phantom power to drive single phase energy meter, usually it is the main part of energy meter test bench.

2. Feature and function
1) Equipped with electronic phantom load power source, assuring high stability, security and large output capacity.
2)Automatic adjustment of current measurement range. Fault self-detection in voltage amplifier and current amplifier.
3) Equipped with RS-232C interface, can be operated from software.
4) Test results can be saved to database, can be inquired from database and can be export to EXCEL file and then printed out.

3. Technical specification
Power Supply：220V ±10％，50Hz/60Hz；
Max consumption：800VA
Technical specification of phantom load power source
Power and consumption:
Power supply: 1P2W 220V ±10％, 50Hz / 60Hz;
Max consumption: 700VA
Dimension: 500mm X 350mm X 650mm
Current source:
Output current: 3×0.001A - 3×100A
Adjusting resolution: 0.01％ (min. 0.0001A)
Power factor: -1.0 ~ 1.0(0~3600; resolution: 0.10)
Output frequency: 45Hz~65Hz;
THD(sine wave output): <0.8％
Stability of current during sine wave output: 0.05％ (180s)
Output wave: sine wave
Output capacity: 150VA per phase
Voltage source:
Output voltage: 3×30V - 3×300V
Load: The Load could be resistor / inductive / capacitive(<4uF)
Adjusting resolution: 0.01％ (min. 0.1V)
Output frequency: 45Hz~65Hz;
THD (sine wave output): <0.8％
Voltage stability of power source during sine wave output: 0.05％ (180s)
Output wave: sine wave

Output capacity: 15VA per meter position
Technical specification of Error calculator
Impulse of tested meter could be: TTL / OC / Optical head(Scan head)
Max. frequency impulse could be: 200Hz
Error display range: 0.001％-99.99％

4.Goods list of one set equipment
1) KP-P3001-C three phase phantom power source
3) Meter rack (2/3/4 positions)
4) Pulse input cable 1/per meter position