2. Feature and function
1) Equipped with electronic phantom load power source, assuring high stability, security and large output capacity.
2)Automatic adjustment of current measurement range. Fault self-detection in voltage amplifier and current amplifier.
3) Equipped with RS-232C interface, can be operated from software.
4) Test results can be saved to database, can be inquired from database and can be export to EXCEL file and then printed out.

3. Technical specification
Specification of phantom load power source:
Power and consumption:
Power supply: 1P2W 220V±10％, 50Hz / 60Hz;
Max consumption: 400VA
Dimension: 480mm X 200mm X 450mm
Current source:
Output current: 1×0.01A - 1×100A
Adjusting resolution: 0.01％ (min. 0.001A)
Power factor: -1.0 ~ 1.0(0~360 0 ; resolution: 0.1 0 )
Output frequency: 45Hz~65Hz;
THD(sine wave output): <0.8％
Stability of current during sine wave output:0.05％ (180s)
Output wave: sine wave
Output capacity: 30VA per meter position
Voltage source:
Output voltage: 1×30V - 1×300V
Load: The Load could be resistor / inductive /capacitive(<4uF)
Adjusting resolution: 0.01％ (min. 0.1V)
Output frequency: 45Hz~65Hz;
THD (sine wave output): <0.8％
Stability of voltage during sine wave output:0.05％ (180s)
Output wave: sine wave
Output capacity: 15VA per meter position